Anritsu MS2722C, User Manual

Page: 52 / 112

3-10 PN: 10580-00277 Rev. E Spectrum Master UG
2. Press the
Marker Table On Off
submenu key so that
On
is underlined. All markers and
delta marker data are displayed in a table under the measurement graph.
3-8 Selecting a Measurement Type
1. Change the measurement mode (if required). Press
Shift
then
Mode
(#9).
2. Select the measurement type. Press
Shift
then
Measure
(#4). Select the appropriate
measurement type with the submenu key.
3-9 Saving Measurements
1. Press
Shift
then
File
(#7).
2. Press the
Save Measurement
submenu key.
3. Press the
Change Save Location
submenu key and set the current location to be the USB
flash drive or internal memory, and then press
Set Location
.
4. Press
Change Type (Setup/JPG/…)
and select
Measurement
.
5. Enter the file name using the letter key and press
Enter .
Refer to Chapter 4, “File Management” for additional information.
3-10 Master Software Tools
Anritsu Master Software Tools is a Microsoft Windows compatible program for transferring
and editing saved measurements, markers, and limit lines to a PC. Refer to
Chapter 7, “Master Software Tools” for an overview of MST.
Figure 3-3. Six Noise Markers