Anritsu MS2722C, User Manual

Page: 21 / 112

Soft Carrying Case
Spectrum Master UG PN: 10580-00277 Rev. E 1-9
1-15 Soft Carrying Case
The instrument can be operated while in the soft carrying case. On the back of the case is a
large storage pouch for accessories and supplies.
To install the instrument into the soft carrying case:
1. The front panel of the case is secured with hook-and-loop fasteners. Fully close the front
panel of the case. When closed, the front panel supports the shape of the case while you
are inserting the Spectrum Master.
2. Place the soft carrying case face down on a stable surface, with the front panel fully
closed and laying flat.
3. Fully open the zippered back of the case.
4. Insert the instrument face down into the case, taking care that the connectors are
properly situated in the case top opening. You may find it easier to insert the
connectors first, then pull the corners over the bottom of the Spectrum Master.
5. Close the back panel and secure with the zipper.
The soft carrying case includes a detachable shoulder strap, which can be connected to the
D-rings on the upper corners of the case, as required for comfort or convenience.
Note
Two zippers provide access around the back of the case. The zipper closer to the
front of the case opens the case back, and allows access to install and remove the
instrument. The zipper closer to the back of the case opens a support panel that
can be used to provide support for improved stability and air flow while the
instrument is in the case. This support panel also contains the storage pouch.
Figure 1-2. Instrument Inserted Into the Soft Carrying Case