Chapter 1 Overview
1.3 Product
Configuration
The MP1590B-30 option can only be installed in one of the following set-
ups. Once installed, the setup cannot be changed.
You cannot add this option once it is shipped, as this option is selected
when the MP1590B and the unit is delivered.
Configuration 1
MP1590B Main Frame
MU150100A 10/10.7 G unit
MU150110A Multirate unit *2
MU150121A 10/10.7 G Optical unit (Tx)
MU150121B 10/10.7 G Optical/Electrical unit (Tx)
*1
MU150123A 10/10.7 G Optical unit (Rx wide)
MU150123B 10/10.7 G Optical/Electrical unit (Rx wide)
MU150125A 10/10.7 G Jitter unit
*1
*1
Configuration 2
MP1590B Main Frame
MU150100A 10/10.7 G unit
MU150110A Multirate unit *2
MU150134A 10/10.7 G Optical unit (Tx Ex.Mod)
MU150123A 10/10.7 G Optical unit (Rx wide)
MU150123B 10/10.7 G Optical/Electrical unit (Rx wide)
*1
*1
MU150125A 10/10.7 G Jitter unit
*1 :Either or two units.
*2 :MU150110A function and performance are not guaranteed when
using 2.5G/2.G.
The models and serial numbers of the mounted units are confirmed dur-
ing MP1590B startup. If they are different from those of the units
whose performance is guaranteed to apply the MP1590B-30 option, an
alarm message will be displayed during MP1590B application startup.
When the MP1590B application is started up as is (ignoring the alarm
message), the MP1590B can be used for normal operation, but the func-
tion and performance of the MP1590B-30 option are not guaranteed.
1-4.