Anritsu MN4765B, Operation Manual

Page: 10 / 31

2-2 PN: 10410-00742 Rev. H O/E Module MN4765B OM
2-4 Preparation for Use Installation
2-4 Preparation for Use
Preparation for use consists of familiarizing yourself with the MN4765B,
cabling the calibration module to the Anritsu Vector Network Analyzer, and
attaching the supplied AC adapter.
The MN4765B’s interfaces are outlined in Figure 2-1 .
Note
Experience with an Anritsu Vector Network Analyzer is assumed.
Refer to the operation manual and measurement guide supplied
with the VNA for information and operating instructions with the
Anritsu VNA. See
“Anritsu VNA-Related Documentation”
on page 1-3 .
1
RF Out connector:
Male K connector on an MN4765B-0040/-0042/-0043
Male V connector on an MN4765B-0070/-0071/-0072
Male W connector on an MN4765B-0110
Each connector has an easy to use coupling nut. Be sure to follow proper
torquing instructions when making connections to the RF connector.
2
The Warning label indicates that the maximum optical input power to the
MN4765B is 10 mW or 10 dBm. Exceeding this value will cause damage
to the internal photodiode.
Figure 2-1. MN4765B O/E Calibration Module (1 of 2)
1
2
3
4
6
5