3-3 Battery Removal
Performance Considerations
3-2
PN: 10410-00783 Rev. A
MN25131A OM
3-3
Battery Removal
The battery can be replaced without the use of tools. The battery compartment door is located on the right side
of the unit (when you are facing the front of the unit). To remove the battery:
1.
Unscrew the knurled connector on the battery compartment cover.
2.
Remove the battery door.
3.
Pull straight out on the lanyard to remove the battery pack from the unit.
3-4
Supply Overload Protection
•
The battery will disconnect the outputs when the load current exceeds 8 amps for 6 seconds.
•
All output voltage connections have overload protection that will shut down the specific supply when its
current rating or output voltage is exceeded.
Figure 3-1.
Battery Compartment and Battery Removal
Note
When inserting the battery, the battery contacts should face up and slide in first. If the battery door
does not close tightly, the battery may be inserted incorrectly.