MA24104A UG
PN: 10585-00016, Rev. A
2-1
Chapter 2 — Installation (PC Only)
2-1
Introduction
This chapter provides information and instructions on operating the MA24104A power sensor. It contains the
following:
• Hardware and Software Requirements for the Anritsu Power Meter Application
• Driver Installation procedure for properly installing the driver for the sensor
2-2
Hardware and Software Requirements
Please make sure that the following minimum requirements are met for installing and using the software:
• Intel
®
Pentium
®
III or equivalent processor
• Microsoft
®
Windows Vista
®
(32-bit only), Windows XP or Windows 2000
• 512 MB of RAM
• 100 MB of available hard-disk space
• 1024 × 768 display resolution
• PC or laptop with a USB port and CD-ROM drive
2-3
Driver Installation
The driver must be installed before the MA24104A power sensor can be used. Follow the steps below as a guide
for proper installation:
1. Insert the installation CD in the drive of your computer. If the installation menu does not start
automatically, open the file named
Startup.htm
located on the CD.
Figure 2-1.
Anritsu Power Meter Installation Menu
Note: If required, please install the Microsoft
®
.Net Framework, version 2.0.
