2-14 Channel Power Measurement
Spectrum Analyzer
2-20
PN: 10580-00349 Rev. M
Spectrum Analyzer MG
9.
Press the
Ch Pwr Width
submenu key and enter
200 kHz
for the integration bandwidth,
or set the integration bandwidth appropriate for the particular application.
10.
Press the
Span
submenu key and enter
600 kHz
as the channel span, or set the channel
span to a value appropriate for the particular application.
11.
Make the measurement by pressing the
Measure
(4) key, the
Power and Bandwidth
submenu key, and the
Channel Power
submenu key. Then press
On
. The measurement
results are displayed in the message area.
Note
Channel Power is a constant measurement. After it is turned on, it will remain on
until it is turned off by pressing the On/Off submenu key again.
