background image

 

11.

 

DISPOSAL

 

AND

 

ENVIRONMENTAL

 

PROTECTION 

 

Never pour waste chain lubricant or 2-stroke fuel mixture into the drain or 
sewer system or ground, but dispose of it in an appropriate, 
environmentally friendly manner, for example, at a special collection point 
or landfill. 
If your machine does not work at any time, in the future or you do not 
need it any longer, do not dispose of the device together with your 
household waste, but dispose of it in an environmentally friendly way. 
Completely drain the oil / lubricant and fuel tanks and dispose of the 
waste in a special collection point or landfill. Also dispose of the device at 
an appropriate collection / recycling point. In this way, 
plastic and metal parts can be separated and recycled. 
Information on disposal of materials and devices is 
available from your local administration. 
 

12.

 

WARRANTY 

 
For this gasoline tool, the company provides the end user - regardless of 

the obligations of the retailer resulting from the purchase contract - with 

the following guarantees: 
The warranty period is 24 months from the delivery of the device which 

must be proven by the original purchase document. For commercial use 

and rental use, the warranty period is shortened to 12 months. Excluded 

from this warranty are wear parts and defects caused by the use of 

inappropriate accessories, repair with parts that are not original 

manufacturer parts, the use of force, shock and breakage, as well as a 

mischievous overload of the motor. Warranty replacement only includes 

defective parts, not complete devices. Warranty repair will be carried out 

exclusively by authorized dealers or company customer service. In the 

event of any intervention by unauthorized personnel, the warranty will be 

void. 
All shipping or shipping costs, as well as any other subsequent costs, will 

be borne by the customer. 

 

 

 

Summary of Contents for MG246































Reviews: