background image

 

11. DISPOSAL AND ENVIRONMENTAL PROTECTION 

 

Never pour waste chain lubricant or 2-stroke fuel mixture into the drain or sewer 

system or ground, but dispose of it in an appropriate, environmentally friendly 

manner, for example, at a special collection point or landfill. 

If your machine does not work at any time, in the future or you do not need it 

any longer, do not dispose of the device together with your household waste, 

but dispose of it in an environmentally friendly way. Completely drain the oil / 

lubricant and fuel tanks and dispose of the waste in a special collection point or 

landfill. Also dispose of the device at an appropriate collection / recycling point. 

In this way, plastic and metal parts can be separated and recycled. Information 

on disposal of materials and devices is available from your local administration. 

 

12. WARRANTY 

 

For this gasoline tool, the company provides the end user - 

regardless of the obligations of the retailer resulting from the 

purchase contract - with the following guarantees: 

The warranty period is 24 months from the delivery of the device which must be 

proven by the original purchase document. For commercial use and rental use, 

the warranty period is shortened to 12 months. Wear parts and defects caused 

by the use of unsuitable accessories, repair with parts that are not original 

manufacturer parts, the use of force, knocks and breakage as well as a 

mischievous overload of the motor are excluded from this warranty. Warranty 

replacement only includes defective parts, not complete devices. Warranty 

repair will be carried out exclusively by authorized dealers or company customer 

service. In the event of any intervention by unauthorized personnel, the warranty 

will be void. 

All shipping or shipping costs, as well as any other subsequent costs, will be 

borne by the customer. 

 

 

 

Summary of Contents for M437HXP

































Reviews: