background image

13 

 

5. CLEANING AND STORAGE 

Turn off the pressure washer 

When you finish using the machine, follow the steps to turn off and the pressure washer 

correctly and safely: 

  Place the pressure washer in the “OFF” position. 

  Unplug the power cord from the wall outlet. 

  Close the water supply. 

  Before disconnecting the high pressure hose connection, point the gun in a safe direction 

and discharge the high pressure water. 

  Disconnect the high pressure hose from the pressure washer and the gun. 

  Disconnect the garden hose from the pressure washer. 

  Remove the quick coupler attachment from the garden hose and attach it to the nozzle 

portion of the attachment installed on the pressure washer for storage. 

  Remove excess water from the pump by tipping the unit on both sides to drain any 

remaining water from the inlet and outlet fittings. 

  Remove the water inlet filter and rinse it with water to remove any dirt or debris. Return 

the filter once clean. 

  Drain the detergent drawer and wash it under running water. 

  Wipe off any traces of water on all parts and accessories. 

  Engage the gun safety lock. 

  Store the pressure washer, parts and accessories in an area with a temperature above 

0°C (32°F). 

 

Winterization and long-term storage 

Follow the above shutdown procedures adding the following steps: 

  After disconnecting the water supply and before disconnecting the high-pressure hose, 

turn on the pressure washer for 2-3 seconds, until the remaining water in the pump 

comes out. 

  Power off the machine immediately. Remember that continued use of the pressure 

washer without an attached water supply will cause severe damage to the machine. 

  Always store the pressure washer, parts and accessories in an area with a temperature 

above 0°C (32°F). 

Warning: Failure to follow these storage instructions will damage the pump assembly. 

 

Maintenance 

  This pressure washer is supplied with a closed lubrication system, so there is no need to 

add oil. 

  Check all hoses and fittings for damage before use. 

  Check inlet filter periodically for deposits. Clean this filter regularly for maximum 

performance. 

 

Cleaning tips 

Warning: Always test spray in a safe area free of people, objects, or animals before spraying 

on intended cleaning surface. 

 

Wood and vinyl decks 

  Rinse cover and surrounding area with fresh water. If you use detergent, fill the detergent 

dispenser and apply it to the area being cleaned at low pressure. 

  For best results, reduce your work area to smaller sections and clean each section one 

at a time. 

  Let the detergent sit on the surface for a few minutes, then rinse with high pressure. Do 

Summary of Contents for H1950



















Reviews: