21
- -
4. MAINTENANCE
Before any cleaning/maintenance action the operator has to absolutely switch the motor off.
Maintenance has to be made by skilled personnel only, with the sole use of original spare parts.
In order to assure a high performance for a long time operator has to make a simple
maintenance work as mentioned in the following table.
POS.
COMPONENT
ACTION
FREQUENCY
1
Carbon rods
Check if assembled
correctly
Daily
2
Piston
Grease through the
proper opening
3 times a day
3
D226ML-5
Cleaning after use
Daily
NOTE: Do not use air compressors
NOTE: Use molybdenum disulfide lubricant
NOTE: The inside mechanisms of D226ML-5 are protected for a lifetime with a special
grease. DO NOT OPEN THE MACHINE UPPER PART. Any tampering will invalidate the
manufacturer warranty.
5. WARRANTY
D226ML-5 is manufactured with top quality materials, it is 100% tested and covered by warranty
according to the law.
The warranty does not apply to damages caused by an incorrect use of the machine; the proper
use of D226ML-5 is mentioned in this manual.
The wa
rranty doesn’t apply to any direct or indirect damage arising from the use and/or the
keeping of the machine, nor from its malfunctioning, and it will in no case exceed the value of
the machine. The warranty does not apply to the following cases:
An erroneous action by the operator
Damages caused by incorrect maintenance or the lack thereof
Damages caused by the assembly of non-original parts or by repair operations performed
without the authorization of the manufacturer
Failure to comply with the instructions provided in this manual
