Anova CC251T Instructions Manual Download Page 6

 

WARNING:

 

This machine produces an electromagnetic field during its operation. This field 

can in some circumstances interfere with active or passive medical implants. To reduce the risk 

of serious injury or death, we recommend that individuals with medical implants consult their 

physician and the manufacturer of the medical implant before operating this machine.

 

 

Training

 

Please read the instructions carefully. You should get used to the controls and the proper use 

of the equipment;

 

● Never allow children or persons unfamiliar with these instructions to use the mower. Local 

regulations may restrict the age of the operator;

 

● Never mow while people, especially children, or pets are nearby;

 

● Please note that the operator or user is responsible for accidents or hazards occurring to 

other people or their property.

 

● Operators must be properly t

rained in the use, adjustment and operation of the machine, 

including prohibited operations.

 

 

Preparation

 

While mowing, always wear long shoes and pants. Do not use the equipment when barefoot 

or wearing open sandals.

 

● Thoroughly inspect the area 

where the equipment is to be used and remove all objects, 

such as stones, toys, sticks and wires, that can be thrown by the machine; 

 

● WARNING 

- Gasoline is highly flammable.

 

- Store fuel in containers specifically designed for this purpose.

 

- Fill fuel only outdoors and do not smoke during the refilling process.

 

- Add fuel before starting the engine. Never remove the fuel tank cap or add gasoline while 

the engine is running or when the engine is hot.

 

-If gasoline is spilled, do not try to start the engine, but move the machine away from the spill 

area and avoid creating any source of ignition until the gasoline vapors have dissipated.

 

- Replace all fuel tank and container caps securely;

 

● Replace faulty mufflers.

 

● Before use, always visually inspect to se

e that the blades, blade bolts and blade assembly 

are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve 

balance.

 

 

 

Operation

 

Do not run the engine in a confined space where dangerous carbon monoxide fumes can 

collect.

 

● War

ning! Do not use the mower when there is a risk of lightning.

 

● It is recommended to limit the duration of the operation, to minimize the risks of noise and 

vibrations.

 

● Be careful when using the mower on slopes and near drop

-offs, ditches or embankments.

 

● Cut only in daylight or good artificial light.

 

● Avoid operating equipment on wet grass, when feasible.

 

● Always make sure you are sitting on slopes.

 

● Walk, never run.

 

● For wheeled rotary machines, mow across the face of slopes, never up and 

down.

 

● Use extreme caution when changing direction on slopes;

 

● Do not mow excessively steep slopes.

 

● Be very careful when backing up or pulling the mower toward you.

 

● Stop the blade if you have to tilt the mower for transport when crossing surfaces oth

er than 

grass and when transporting the mower to and from the area to be mowed.

 

Summary of Contents for CC251T




















Reviews: