16
8.Control board
The control panel situated on the top cover of the ArcPower 16x1 allows DMX addressing and set
the fixture´s behaviour.
Control elements:
[ENTER] button- enters menu,confirms adjusted values and leaves menu.
, [UP] button and[DOWN] button- moves between menu items on the the same level, sets values.
[ESCAPE] button- leaves the menu without saving value.
After switching on the ArcPower 16x1 ,the display shows the initial DMX address:
Use [UP],[DOWN] to browse through the menu. To select a function or submenu,press [ENTER].
8.1 Addressing the ArcPower 16x12
Setting the DMX start channel:
1.
Connect the ArcPower 16x1 to the mains.
2.
Browse through the menu by pressing the [UP] and [DOWN] buttons until the display shows current addres
"A001"
.Confirm by pressing [ENTER] button and
"A001"
will start to flash frequently.
3.
Use the [UP] and [Down] buttons to select the desired address.
4.
Confirm by pressing [ENTER].
After having addressed ArcPower 16x1
,
you may now start operating ArcPower 16x1 via your DMX control-
ler.
8.2 Fixture information
Use this menu to read useful information about the fixture status.
To display desired information.
1. Use the UP/DOWN buttons to find the “ InFo“ menu.
. Press the ENTER button.
3. Use the UP/DOWN buttons to select the required menu item.
4. Press the ENTER button to confirm the choice.
DM.In.---DMX values
. Select this function to read DMX values of each channel received by the fixture.
tEMP --- Fixture Temperature
. Select this menu to read the temperature of the fixture:
VErS. ---Software Versions
. Select this function to read the software version of each board in the fixture .
Summary of Contents for ArcPower 16x12
Page 1: ...Version 1 3...
Page 9: ...CHAr EYE LinE i bLi On Off dFSE no YES uPd no YES...
Page 23: ...23...
