9
Pr Play
-
Playing program
. Select this menu to run a desired program in a loop.
Prog 1- Test
-
Select the program you wish and press
[ENTER]. The selected program
starts running. By Pressing the
[ENTER] again, the program pauses running. The speed
of the running program can be changed by means of the [NEXT] and [PREV] buttons
(100%-default value).
Note: adjusted program speed is saved into the fixture and will not be changed until another
program speed adjusting is performed or default values are loaded.
Pr Edit
-
Editing program
. Select this menu to edit or create the program. The ArcPar S1 has three user-
editable programs, each up to 40 steps. Each program step has a step time - during which effects last in the
current step and a fade time- during which effects move to new positions.
To edit program:
1. Press [NEXT] or [PREV] to select the menu "Pr Edit" and press [ENTER].
2. Press [NEXT] or [PREV] to select the desired program and press [ENTER] button.
3. Press [NEXT] or [PREV] to select the desired program step and press [ENTER] button.
4. Press [NEXT] or [PREV] to select the desired item and press
[ENTER] button. Now you can edit by [NEXT]
or [PREV]
buttons the DMX value (0-255) for selected item:
Prg En.
a total number of the program steps (value 1-40). This value you should be set before
starting of programming
(e.g. if you want to create program with the 10 steps,
set Prg En=10).
Stro a strobe/shutter
Dimm a dimmer coarse
F.Tim a fade time (0-5.5 sec)
S.TiM a step time (0-5.5 sec)
COPY copying the current prog. step to
the next prog. step
5. Press [ENTER] button to confirm adjusted value .
6. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 4 - 5).
6.7 Special functions (Special)
RDM Low
-
This menu item shows the first part of the RDM identification code
.
RDM High
-
This menu item shows the second part of the RDM identification code.
Wireless
-
Wireless DMX information
. The menu allows to read some information about
Wireless DMX operation
Stat
-
Wireless status
. Use the menu to read wireless DMX status.
Unlink
- use this item to unlink fixture from wireless DMX.
Sw Upd
-
Software update
. The menu item allows you to update software in the fixture via either serial or
USB port of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP/7/8 or OSX
- Update software
- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)
Note 1: Software update should execute a qualified person. If you lack qualification, do not attempt the update
yourself and ask for help your Anolis distributor.
Note 2: DMX address, , programs 1-3 and all items in the menu "Pers" will be set to their default (factory) values
after software update.
To update software in the fixture:
I. Installation of the update software.
1. Update Software available from the Anolis web site at WWW.anolis.cz.
2. Make a new directory on your hard disk and download the software to it.
3. Unpack the program to the directory.
II.Fixture software updating.
1.Determine which of your ports is available on your PC and connect it:
- with the DMX input of the fixture if you using the flash cable RS232/DMX
- with the USB input of the Robe Universal Interface if you using the USB cable. Connect DMX
