ArcPad Xtreme-CE
7
3.3 Installation of the barn-doors, top/half top hats
You can install barn-doors or top hats to better define illuminated surface.
Before installing the equipment disconnect the fixture from the mains.
1.
Fit the barn-doors module (1) or top/half top hat (2) on the LED module (4) and fasten it by means of the
12 screws (3) as shown on the picture below.
2.
Repeat the same steps for the second LED module of the fixture.
Never close the barn-doors during fixture operation!
3.4 Setting and control
For setting DMX address, selecting DMX mode and for another settings you need either Robe Universal Interface
or the RDM Communicator. Please see the Robe Universal Interface or RDM Communicator user manuals to get
more information about this products. The way, how to connect these interfaces to the DMX data link is figured
below.
NOTE
: never connect the RDM communicator and the The Robe Universal Interface to the fixture at the same
time.
1.Robe Universal Interface
Summary of Contents for arcpad xtreme-ce
Page 1: ...Version 4 0...
Page 38: ...ArcPad Xtreme CE 38...
