annke I51DB, Quick Start Manual, Page: 16 / 32

2.1.2 Typ e II
Step s:
Disassemble the camera. 1.
1).
Rotate the trim ring an clockwise to take it o from the camera.
Network
Turret
Camera
·
Quick Start Guide
15
2).
Loosen the xing screw. Take the moun ng base o from the
camera and the enclosure.
3).
Separate the camera and the enclosure.
①
②
③
Fixing Screw
Disassemble the Camera Figure 2-6
Install memory card If the IP camera is used with a video recorder, . 2.
1).
Unscrew the memory card slot cover.
2).
Insert the memory card.
Memory Card
Install Memory Card Figure 2-7
3).
(Op onal) to unmount the memory card, push to get it ejected.
the video recorder can directly record videos. And you don’t need
to insert a TF card. If you use the IP camera alone, you need to
insert a TF card before recording videos.