annke I51DB, Quick Start Manual, Page: 11 / 32

N etw ork TurretC am era ·
Quick Start Guide
10
2 In stallation
B efore you start:
●
Make sure the device in the package is in good condi on and all
the assembly parts are included.
●
The standard power supply is 12 VDC, please make sure your
power supply matches with your camera.
●
Make sure all the related equipment is power-o during the
installa on.
●
Check the speci ca on of the products for the installa on
environment.
●
Make sure that the wall is strong enough to withstand four
mes the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay a en on to
the following precau ons to prevent IR re ec on:
●
Make sure that there is no re ec ve surface too close to the
camera lens. The IR light from the camera may re ect back into
the lens causing re ec on.
2.1
Ceiling Moun
Before you start:
2.1.1 Type l
Both wall moun ng and ceiling moun ng are suitable for the turret
camera. Ceiling moun ng will be taken as an example in this sec on.