9
P2P
Via the SN from scanning the QR code, you can access the device in the WAN. Please refer
to the P2P operation manual included in the resources CD. From main menu->Setting->Network-
>P2P, you can go to the following interface, the P2P interface is shown as in
错误
!
未找到引用
源。
Register Mode
P2P: for network environment, add device by scanning two-
dimension code, inputting SN.
QuickDDNS: for network environment, add device by inputting
complete domain name address, and analysis is done by
QuickDDNS.
IP/Domain name: for normal environment, add device by inputting
its IP address or third-party domain name.
Name
Device name.
SN
P2P type: input SN .
QuickDDN type: input complete domain name.
IP/Domain name type: input IP address or complete third party
domain name.
* Note: Just input SN code on the NVR to add IP cameras which are
already connected to NVR.
Username/Password Device username and password are both admin. If changed, please
input new username and password.
Live
Preview/Playback
Select main stream or extra stream for live preview and playback.
