Digital Video Recorder User Manual
68
Chapter 10 Network Settings
10.1 Configuring General Settings
Purpose:
Network settings must be properly configured before you operate DVR over network.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
Figure 10. 1 Network Settings Interface
2.
Select the
General
tab.
3.
In the
General Settings
interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of
DHCP
to automatically obtain an IP address
and other network settings from that server.
The valid value of MTU is from 500 to 1500.
4.
After having configured the general settings, click the
Apply
button to save the settings.
10.2 Configuring Advanced Settings
10.2.1 Configuring PPPoE Settings
Purpose:
The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the
Network Settings
interface.
Menu > Configuration > Network
2.
Select the
PPPoE
tab to enter the PPPoE Settings interface.
