anko SL-2077A-20 User Manual Download Page 2

IMPORTANT SAFE INSTRUCTIONS

 

 

When using any electrical product, always follow these basic safety precautions:

 

 

READ ALL INSTRUCTIONS BEFORE USE.

 

 

Read this user manual carefully before first use and save it for future reference. 

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and knowledge, unless they have been given 
supervision or instruction concerning use of the appliance by a person responsible for their safety.   

 

Children should be supervised to ensure that they do not play with the appliance.   

 

Cleaning and user maintenance shall not be made by children without supervision. 

 

This product has been designed for domestic use only. In case of any commercial use, inappropriate 
use or failure to comply with the instructions, the guarantee will not apply. 

 

Before connecting your appliance, check if the mains voltage is the same as the voltage indicated on 
your appliance and that the power outlet has an earth connection. If unsure check with an 
electrician. 

 

Before each use ensure that the electric cord or any other parts on the iron is not damaged. If any 
damage is evident, do not use. 

 

If the supply cord is damaged, it must be replaced by qualified electrical person only. 

 

Keep the iron and its cord out of reach of children when it is connected to mains power or when 
cooling down. 

 

Never direct the steam towards persons or animals. Never direct the steam jet towards any other 
electrical or/and electronic appliances. 

 

DO NOT use

 the iron if it has been dropped, if there are visible signs of damage, malfunction or if it 

is leaking.   

 

Always make sure the appliance is switched OFF, unplugged and cooled down before cleaning. 

 

IMPORTANT! The iron must not be left unattended whilst connected to mains power and before it 
has cooled down

The soleplate of the iron can become extremely hot and may cause burns if 

touched. 

 

Do not unplug the appliance by pulling on the cord or on the appliance. Always disconnect from 
mains power by pulling on the plug. 

 

Never immerse the iron, the stand, the power cord or the plug in water or other liquid. Never wash 
them under a water tap. 

 

The plug must be removed from the socket-outlet before filling the water reservoir with water.   

 

The iron must be used and rested on a flat, stable surface.   

 

When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.   

 

For additional electrical safety, this appliance should be connected to a household residual current 
device (RCD/safety switch) with a rating of no more than 30mA. If unsure consult your electrician 
for advice. 

 
 
 
 
 

Summary of Contents for SL-2077A-20









Reviews: