•
Turn the temperature dial (6) to a setting within the steam range
.
•
The indicator lamp (8) will light up. The light will turn off as soon as the selected temperature is
reached.
•
Turn on the steam control
and begin ironing.
NOTE: Always follow the recommended ironing instructions found on the garment. If there is no
ironing instructions on the garment, use the heat settings in the table as reference.
Dry Ironing
•
Position the iron vertically on its stand on a suitable flat stable surface.
•
Ensure that the steam control (3) is set to OFF position
•
Connect the power cord plug into a suitable mains power outlet socket.
•
Turn the temperature dial (6) to a desired heat setting.
•
The indicator lamp (8) will light up. The light will turn off as soon as the selected temperature is
reached.
•
Now dry ironing can begin.
Using Spray button
•
Set the temperature dial (6) at MAX position, When the indicator lamp goes off, Press the spray
button (5) a couple of times to moisten the garment. Before spraying make sure that there is enough
water in the water tank.
NOTE: Do not spray water on silk.
Using Steam Shot button
•
Set the temperature dial (6) at MAX position, When the indicator goes off, Press the steam shot
button (4) to instantly provide a powerful burst of steam to eliminate stubborn wrinkles.
•
The steam shot button can also be used when holding the iron in a vertical position. This is useful for
removing creases from hung clothes, curtains, etc.
ATTENTION: To protect against burns or injury to persons, do not iron or steam fabrics while being
worn on the body. Do not direct steam towards the body when ironing.
After ironing
•
After use, rotate the temperature dial (6) to OFF position and disconnect the iron from the mains
power outlet socket.
•
Let the iron cool down and empty the water tank to prevent built up of any residue in the water tank.
