OPERATING INSTRUCTIONS
Hair Clipper
WARNING:
Switch off the device before replacing or changing the attachments
NOTES:
The hair to be dressed must be dry.
NOTES:
The cutting length may deviate depending on the cutting angle. Please
start with a comb attachment with a longer cutting length and then, in the
course of cutting process, use shorter cutting lengths step by step
.
1. Ensure the hair clipper is switch OFF.
2. Insert comb attachment. Line the comb rails up with the vertical channels on
boths sides of the clipper, slide the comb all the way until it stops. (Fig. 1)
3. Adjust the trim length. Rotate the comb length ajustor and the comb will
move up and down.(Fig. 2). There are 9 different comb position to adjust
trim length from 3mm - 15mm.
Comb Position
Comb length
1
3mm
2
4.5mm
3
6mm
4
7.5mm
5
9mm
6
10.5mm
7
12mm
8
13.5mm
9
15mm
4. 0.5mm is achieved without any combs and holding the blades perpendicular
to the skin.
5. Hold the device so the the comb attachment rests flat on the head. Move the
device evenly throught the hair.
NOTE: For even cutting, allow the comb attachment to cut is way through the
hair. Do not force it through quickly. If you are cutting for the frist time, start
with the longest comb length.
