BEFORE FIRST USE
Hair clipper
Before using your hair clipper for the first time, charge for 12 hours.
Ensure the product is switched OFF before charging.
Connect the charging adaptor to the product and then connect to mains power.
RED indicator light will illuminate to indicate the product is charging.
IMPORTANT! The RED battery charge indicator light will remain ON after
the battery is fully charged. To prevent damage to the battery never
charge the hair clipper for more than 24 hours.
This appliance can be charged directly or rest on the charging base when
charging.
It will take 8 hours to fully charge the batteries in the hair clipper.
IMPORTANT! Use only the provided charger KH6-030060AU.
BATTERY CARE
To ensure maximum life from the batteries in your rechargeable hair clipper, follow
these guidelines:
Do not recharge the hair clipper between sessions. Wait until the batteries are
exhausted before recharging.
Discharge the batteries completely twice a year (switch ON and run until the
shaver stops).
IMPORTANT! Do not use the hair clipper while charging.
Do not charge the hair clipper when the temperature is below 0°C or above 40°C
Avoid recharging the hair clipper in direct sunlight or near a radiating heat source.
Ear and Nose Trimmer
Require 1x 1.5V AA battery (included)
Remove battery cover by lightly turning it in anti-clockwise direction.
Insert battery and ensure battery polarify is correct. Insert positive (+) side first as
shown below.
Replace the battery cover and turn it in clockwise direction until it clicks into
place.
For the best reuslts, use alkaline battery.
Remove the battery if the trimmer is not used for a prolonged period.
