3. Press the lid down to close it.
Make sure that the lid is closed properly.
4. Fully unwind the power cord and run it through the cable guide channel on the power base.
5. Place the kettle on the power base. Plug the mains cable into an earthed mains power outlet
socket that is within easy reach.
6. Press On/Off button to start boiling. The Temperature indicator will start flashing. When the
temperature reaches 100
℃
, there will be 3 beep sounds.
7. Four temperature level (70
℃、
80
℃、
90
℃、
100
℃
) can be selected by pressing the Temp
button. There will have a beep sound for each press. Once temperature has been selected,
automatic heating starts after approximately 10 seconds. When the selected temperature has
been reached, there will be 3 beep sounds.
8.
Keep warm function is available for 70
o
C, 80
o
C, and 90
o
C temperature settings only. Press
the Keep Warm button once during water boiling or when the light is on after the boiling is
completed, the Keep Warm function will be activated. The temperature of the boiled water will
be maintained for 30 minutes. Press it again to disable the Keep Warm function.
WARNING: Risk of scalding from hot water & steam.
* Be sure that the water kettle is OFF before removing from the power base.
