3. Specifications
.
Speed adjusting settings.
.
Rating: 220-240V 50-60Hz 600W
4. Operation Guidelines
Caution:
Blades are sharp. Handle carefully.
Before using the blender for the first time
.
Remove all packaging carefully and inspect the product for any damages.
.
Check the blender and power cord for any damages.
.
If the product is damaged or any parts are missing, DO NOT USE.
How to use the hand blender
.
Remove the protective cover from the blade on the blender shaft.
.
Clean the blender shaft and beaker.
.
Fit the power handle inside the blender shaft, turn it clockwise and lock until you hear a slight click.
NOTE: The marks on the power handle and blender shaft should be aligned with each other. If it is
aligned, the blender shaft is locked correctly.
.
Make sure your electricity supply is the same as the one shown on the product rating label.
.
Fill the food /ingredients to the beaker (not more than the maximum indicated level) to hold the
food for blending.
.
Connect the appliance into a mains power outlet and hold the power handle steady. Switch the
appliance on by pressing the switch button.
.
Gently immerse the blade guard completely in the ingredients.
.
Blend the ingredients by moving the appliance slowly up and down and in circles.
.
After you have completed blending, release the switch button, then disconnect from mains power
outlet.
WARNING
:
To prevent damage to the electric motor, the continuous operating time is 30
seconds for lower speed and 10 seconds for higher speed. Allow the appliance to reset at
least 2 minutes between each cycle. After operating 5 continuous cycles, allow the appliance
to cool down for 30 minutes before using it again.
Never blend hot oil, fat or meat.
.
If your blender/chopper gets blocked, first stop and disconnect from mains power before clearing.
.
After use, always disconnect from mains power.
.
Always switch OFF and unplug from mains power before cleaning. Please refer to
“care and
clea
ning” instructions section in this manual.