anko HB956SH6PA Instructions Manual Download Page 3

 

Make sure the blender shaft, whisk or chopper in place, the power cord is 

  not damaged before using the appliance every time. 

Never let the blades face towards anybody while operating the appliance. 

.

 Take special care when preparing food for babies, the elderly and infirm. 

Always ensure that the hand blender shaft, whisk or chopper is 

  thoroughly sterilized by washing it with hot water. 

Never blend or mix hot oil, fat. Please follow the processing guide in the 

  manual.   

Do not let the power cord hang over edge of the table or counter. 

Never let anybody trip over the power cord.   

Do not let the power cord touch hot surfaces or hang down where a child 

  could grab and pull on the power cord.   

Unplug from mains power outlet when it is not in use, before moving the 

  appliance or when adding the food for blending or chopping and before 

 

cleaning. 

Do not use outdoors.

   

Blades are sharp. Handle carefully. 

Never touch the blades or whisk while the machine is connected to mains 

  power.   

Never add ingredients while the hand blender is operating. 

·

The ingredients used should does not exceed the maximum capacity of   

  the chopper bowl.     

·

Do not continuously operate the blender for too long. The motor may 

  overheat. If the surface of the hand blender becomes very hot, allow it to 
  cool down to room temperature before using it again. 

IMPORTANT!  The  continuous  operating  time  without  the  load  must 
be less than 15 seconds.   
·

Do not exceed the quantities and maximum time indicated in the 

  operation guidelines or processing guide. 

.

Take the attachments off before cleaning. 

.

The use of attachments not supplied with the product may cause injury. 

Avoid contacting moving parts. 

Keep fingers, hair, clothing and utensils away from moving parts.   

IMPORTANT!  Keep  hands  and  utensils  out  of  the  container  which 
holds the food while blending or cutting to reduce the risk of severe 
injury to persons or damage to the blender. 

 

Summary of Contents for HB956SH6PA











Reviews: