Page 10 of 12
4 Instructions for Use
Remove the cable tie and unravel the cordset before operation.
4.1 Head Tilt
The fan and motor assembly Can be tilted up and down to your
desired angle.
To adjust the tilt angle, loosen the Tilt Adjustment Knob
(Anticlockwise), tilt the head to the desired angle and then re-
tighten the knob (Clockwise).
4.2 Fan On / Off / Speed
Rotate the knob to position I for a low speed, II for a medium speed
and III for a high speed.
Rotate the knob to position 0 to switch the Fan off.
4.3 Oscillation
Press the clutch knob down to activate the oscillating function.
The fan head will swing from side to side whilst blowing air.
To stop oscillation, allow the Fan head to move into the desired
position and then pull the clutch knob up.
4.4 Height Adjustment
The height of the fan can be adjusted. Unscrew the adjustment
knob on the side of the Tripod Hub, slide the post up or down to
the desired position then tighten the knob again to lock in place.
