anko ATLW55G Instruction Manual Download Page 4

4

For your safety, the information in this manual 

must be followed to minimize the risk of fire or 

explosion, electric shock, or to prevent property 

damage, personal injury or loss of life.

•  This appliance is not intended for use by 

persons(including children) with reduced 

physical, sensory or mental capabilities 

or lack of experience and knowledge 

unless they have been given supervision or 

instruction concerning use of the appliance 

by a person responsible for their safety.

•  Children should be supervised to ensure that 

they do not play with the appliance.

•  If the supply cord is damaged, it must be 

replaced by the manufacturer, its service 

agent or similarly qualified persons in order 

to avoid a hazard.

•  The new hose-sets supplied with the 

appliance are to be used and that old hose-

sets should not be reused.

•  The openings must not be obstructed by a 

carpet.

Model

Washing 

Capacity

Standard Water 

Pressure

ATLW55G

5.5kg

0.03MPa~0.8MPa

ATLW80G

8.0kg

0.03MPa~0.8MPa

Explanation of the following signal words: 

WARNING!

This signal word indicates a potentially 

dangerous situation which may result in death 

or serious injuries unless it’s avoided.

CAUTION!

This signal word indicates a potentially 

dangerous situation which may result in slight 

or minor injuries or damage to property and the 

environment.

NOTE!

This signal word indicates a potentially 

dangerous situation which may result in slight or 

minor injuries.

WARNING!

POTENTIAL ELECTRIC SHOCK

•  This appliance is for indoor use only.

•  Do not position washing machine  

in a humid place.

•  Do not insert your hands into running spin-

dry tub.

•  If the spin-dry tub does not stop within 15 

seconds after opening the cover, please stop 

using the machine and have it repaired.

•  Before performing any maintenance on the 

device, unplug the appliance from the mains.

•  Always unplug the machine and turn off the 

water supply after use. The max. inlet water 

pressure, in pascals. The min. inlet water 

pressure, in pascals.

•  To ensure your safety, power plug must be 

inserted into an earthed three-pole socket. 

Check carefully and make sure that your 

socket is properly and reliably earthed.

•  Make sure that the water and electrical 

devices must be connected by a qualified 

technician in accordance with the 

manufacturer's instructions and local safety 

regulations.

RISK TO CHILDREN

•  The appliance can be used by children 

aged from 8 years an d above and 

persons with reduced physical, sensory or 

mental capabilities or lack of experience 

and knowledge if they have been given 

supervision or instruction concerning use of 

the appliance in a safe way and understand 

the hazards involved. Children shall not 

play with the appliance. Cleaning and user 

maintenance shall not be made by children 

without supervision.

•  Animals and children may climb into the 

machine. Check the machine before every 

operation.

•  Young children should be supervised that 

they do not play with the appliance.

•  Machine may get very hot during the 

operation. Keep kids and pets far away from 

the machine during use and keep away from 

very wet rooms as well as in a room with 

explosive or caustic gas.

Safety Instructions

Summary of Contents for ATLW55G

























Reviews: