anko ATLW55G, Instruction Manual

Page: 18 / 24

18
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch off all controls.
• Switch the washing machine off at the power point or at the fuse box.
• Call the Kmart Customer Service Centre on 1800 124 125 (Australia).
Some minor faults can be fixed by referring to the instructions given in the Troubleshooting
section below.
DESCRIPTION INSPECTION ITEMS
No washing
• If the power is off or the fuse is burned out.
• If the power supply voltage is too low.
• If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
• If it is set to "Delay" washing mode. (It will only start to work until
the reservation time reached)
No water flows in
• If the power is off or the fuse is burned out.
• If the water supply is cut off or the water pressure too low.
• If the inlet hose is properly connected and the water tap is opened.
• If the filtering screen of inlet valve is blocked by dirt.
• If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
• If the "Start / Pause" button is pressed after the power switch is
pressed.
Abnormal draining
• If the water drain hose is placed very high.
• If the end of water drain hose is sealed in pond.
• If the internal rubber ring of drain valve is blocked by dirt.
Abnormal spin
• If the door lid is closed.
• If all clothing piled largely at one side of barrel or the clothing is
excessively placed.
• If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
• If the motor belt is loosened.
Troubleshooting