5. Charging
Open waterproof silicone cover, insert micro USB cable to the charging port of Bluetooth®
speaker and insert other end of cable to DC5V USB charger port. Red LED will be on when
charging and red LED will be off when fully charged.
Warning:
1. Please do not let your Bluetooth® speaker charge all the time, otherwise it will reduce the
battery life.
2. Please do not try to disassemble this device by yourself, some components may be broken
by incorrect operation and therefore sound quality may be not good as before.
Battery caution
⚫
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
⚫
Battery cannot be subjected to high or low extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
⚫
Replacement of a battery with an incorrect type that can result in an explosion or the
leakage of flammable liquid or gas.
⚫
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
all of these can result in an explosion.
⚫
Leaving a battery in an extremely high temperature surrounding environment that can result
in an explosion or the leakage of flammable liquid or gas.
⚫
A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
⚫
Max operating temp
erature: 45˚C.
⚫
Do not charge the speaker if the speaker is in wet or near any water area.
⚫
Waterproof cover should always in closed while using in wet area.
