background image

8

9

Insert 6.35mm wired microphone, and use control knob to adjust 
the sound level.

Connect to Wired Microphone

Connect with  Wired Microphone

When playing with the wired microphone, please use this knob 
to adjust the volume of microphone.

Important Notes

While using the microphone, avoid being put the microphone opposite 
the bass of Party Speaker,as they may have Whistler Noisy.

To get the best singing performance, keep the micro phone within 
5-15cm of the mouth and at a 45 degree angle. 

When using the microphone, always pay attention to the battery. 
If the battery is low, the indicator light will come on and the 
performance will progressively become poor.

Caution: Please do not put the microphone directly face to the 
Party speaker, it may damage the speaker.

When playing with the wired microphone, please use this knob to adjust the echo 
volume of microphone. 

Warranty

NOTE:

1.Please use and place the tripod stand on a flat ground to avoid unbalanced placement.
2.When the speaker and the tripod stand are used together, please ensure tighten all knob 
    screws from both.
3. Please don't place the speakers with different hole sizes to the tripod stand, which may 
    cause unstable and fall down, may hurt the people.
4.The Tripod stand height up to 2.3M, recommend to use for 1.6M, too high may cause 
    knock down.
5.The most stable fixed size between two LED tubes is between 65cm to 85cm.
6.Please take care of the children not to touch or play with the tripod to prevent 
    accidentally push down.
7. Only use the tripod with this speaker only.

Summary of Contents for 42939740







Reviews: