6
7
Function Instructions
USB Operation
This speaker has a USB port for play back MP3 music.
1. Insert your USB device into the USB port and the unit will start playing automatically.
Press the [MODE] button to swith to USB mode if the speaker is on other mode.
2.Press the or key to the previous or next track.
3.Press the button to play or pause music.
FM Operation
This speaker supports FM radio function.
1.Insert the Line In Cable/ FM antenna cable (supplied in the accessories) to the Line
input jack on the rear function panel and extend the cable.
2.Press [ MODE ] button on the rear function panel repeatedly until FM function is selected.
3.Long press button on the function panel to search the FM radio station automatically.
4.Press or to select the previous or next FM radio station.
Bluetooth Operation
This speaker supports Bluetooth function.
1.Press [ MODE ] button on the function panel switch to the Bluetooth mode if the speaker
on other mode.
2.Once on the Bluetooth mode," bLUE ” will keep flashing on the display screen.
3.Open the Bluetooth funciton of the external device and search the Bluetooth device name
"42939740 " to pair.
4.Press connect to “PAIR" with the speaker.
5.Both speakers TWS will pair automatically if above operation correct. Once connected,
" bLUE " will keep static on the display screen, you can play the music with the speaker.
6.You can use button or button on rear the function panel to control the songs of the
external device.
TWS Connecting
This speaker supports TWS pairing function, please buy two same speaker to enjoy this
function.
1.Turn on the Bluetooth function of the one speaker, connected the bluetooth and playing
music.
2.Long press MODE button on the rear function panel to open the TWS function, " E ON "
will short display on the screen.
3.Turn on the bluetooth of another speaker and " bLUE " will keep flashing on the screen,
then long press [ MODE ] button of this speaker to open the TWS function, " E ON " will
short display on the screen and "bLUE " will keep static.
4.Both speakers' TWS will pair automatically if above operation correct. Once TWS paired
successully, " bLUE " of both speaker will keep static.
5.Turn the volume knob on the function panel of any speaker increase or decrease the
music volume.
6.If not using the TWS function, please long press [ MODE ] to deconnected TWS, " E OFF "
will short show on the display screen, and " bLUE " will keep flashing on another speaker.
Function Instructions
Connect with Line in
1.Press [ MODE ] button on the rear function panel to switch to the Line in mode," LINE "
will be displayed on the screen.
2.Connect this speaker Line in input jack and the device Earphone jack by provided
Line in cable (supplied in the accessories)
3.Once connected,turn on your external device and play music.
Caution:
Please turn off the unit before connect AUX cable in order to avoiding
unexpected
noise.
Tripod Stand use with the Speaker
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
1. Please twist loose the knob screw of the fixed mount(#9) on the tripod stand(#5), to loose
the LED tube (#6/#7/# 8) to adjust the size of the fixed position.
2. After twist loosen the knob screw from the fixed mount , please grasp the black centerl
tube (#1) with one hand and push the fixed mount (# 5) with another hand and push it
down; Or grasp any two of LED tubes with both hands (#6/#7/# 8) to pull out
，
and adjust
a suitable fixed size, then tighten the knob screw of the fixed mount (#9).
3. Loosen the two knob screws on the center tube (#2, #3) to adjust the height of the tripod
stand.
4. After adjusted the height of the tripod stand, please must tighten the knob screws of the
center tube(#2, #3) and insert the pin (#4) to the corresponding hole of the tripod stand
to fix the height, to prevent the center tube fall off.
5. There is a groove at the bottom of the speaker (#10), please correspondingly to place
the speaker on the top of the center tube of the tripod stand, also tighten the knob screw
on the rear of the speaker (#11) to prevent the speaker fall off.
