|
37
To charge the tablet, connect the charging cable. If a USB voltage (5V / 450mA) is enough to
operate the tablet, no additional power supply is needed. In this case, use the USB interface
of the EPSON TM-m30 printer.
Note: The transfer of USB data via the charging cable maybe currently not provided.
• To charge the tablet, connect it to the
charging cable.
• The sockets for the tablet are in most
cases on the right side of the tablet.
Removal of the tablet in reverse order.
Removal of the charging cable
Press down against the spring force. Tilt the tablet forward from the upper tablet holder.
Remove the tablet.
5. Operation
5.1. Securing the tablet PC
To secure the tablet against unauthorized removal, the use of a plug-in lock is possible. The
plug-in lock can be ordered under the ANKER part number 99019.156-0000.
Note: The plug-in locks 99019.156-0000 are always delivered with mixed closure.
The closures of the delivered locks are not managed at ANKER. The reordering of keys is
therefore excluded.
• Insert the plug-in lock from below into the
recess provided.
• Turn the key upwards and then remove it.
• The tablet is now secured against
unauthorized removal.
