![background image](http://html1.mh-extra.com/html/anker/mdx-32/mdx-32_operating-manual_2944124029.webp)
|
29
4.4. The status is no longer displayed
Possible cause: Incorrect data transmission.
›
Check that all cables are connected correctly.
›
Ensure that the connectors on the limit switch in the cash
drawer housing are not disconnected.
›› For additional trouble shooting information, see section 4.3: Replacing the control cable
›
Ensure that the control cable has not been caught or broken
›
If necessary, replace the control cable.
›› See section 4.3: Replacing the control cable
Possible cause:
The limit switch is defective.
Unplug the cables to external devices and unplug the mains cord.
›
Remove the cash drawer unit (see section 1.4.2).
›
Remove the cash drawer housing (see section 1.4.3).
Table top/under-the-counter cash drawer
›
Remove the six nuts under the base plate of the cash drawer housing.
›
Remove the base plate from the housing.
!
Make a note of the colours and connections of the cables.
!
Remove all connectors.
› Disconnect all cables to ground (k) and limit switch (i).
› Remove nut
.
› Remove the nuts (n) on the switch support bracket.
› Replace the limit switch.
Reassemble all components in reverse order.
› Reinstall the cash drawer (see section 1.4.4).
!
!
!