background image

12

11

NOTICE 

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

Warning:

 Changes or modifications not expressly approved by the party responsible for compliance could 

void the user's authority to operate the equipment. 

Note: 

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. 
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between 

the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help. 

FCC Radio Frequency Exposure Statement 

The device has been evaluated to meet general RF exposure requirements. The device can be used in 

fixed/mobile exposure condition. The min separation distance is 20cm. 

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance 

with FCC regulations.
The following importer is the responsible party

Company Name: Fantasia Trading LLC  

Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA 91730, USA

Telephone:1-909-484-1530

  This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential 

requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, 

visit www.eufylife.com

Do not use the Device in the environment at too high or too low temperature, never expose the Device 

under strong sunshine or too wet environment.

The suitable temperature for the product and accessories is -20°C-50°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a 

distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure 

requirement, use product that maintain a 20cm distance between the device and the human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED

BATTERIES ACCORDING TO THE INSTRUCTIONS

Wi-Fi Operating Frequency Range:2412~2472MHz for EU;

 

  This product is designed and manufactured with high quality materials and components, which 

can be recycled and reused. 

  This symbol means the product must not be discarded as household waste, and should be 

delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps 

protect natural resources, human health and the environment. For more information on disposal 

and recycling of this product, contact your local municipality, disposal service, or the shop where 

you bought this product.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device."

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement."

IC RF Statement 

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF 

exposure requirements. 
Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux 

exigences en matière d'exposition RF. 
FCC ID:2AOKB-T8420 IC:23451-T8420 

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Summary of Contents for Eufy T8420











Reviews: