background image

18

   English

English   

19

Lock the Door

There are several options to lock the door. 

Option 1: Use the fingerprint 

1. 

Input your fingerprint and wait until the fingerprint breathing light breathes blue once. 

The door will be locked within 1 second. 

2.  If not, the light will breathe red once. Repeat the steps to lock. 
3. 

If you fail to lock the door for 5 times using the fingerprint, the smart lock will be 

unlocked. Use the access code instead. 

Option 2: Use the access code 

1.  Press any key or touch the touchscreen to wake up the keypad. The keypad will light on. 
2. 

Enter an access code. If the access code is right,  press the √ button. The door will be 

locked. If the access code is wrong, press X and enter a new code. 
• 

Valid access code: The √ button turns solid white for 2 seconds. 

•  Access code error: The error X button blinks red for 2 seconds.  A beep will be heard.  

Option 3: Use the eufy Security app 

1.  Open the eufy Security app, the app will search for smart lock Bluetooth, and connect. 
2.  Follow the onscreen instructions on the eufy Security app to lock the door. 

Option 4: Use automatic lock 

1.  On the eufy Security app, set the “Automatic lock” option to On, and set the time 

duration for the door to be locked. 

2.  When the door is closed, the smart door will detect whether the door is locked. If 

not, the door will be locked automatically after the time duration you set. 

Option 5: One-touch lock 

On the eufy Security app, the “one-touch lock” option is set to 

On

 by default. To use 

one-touch lock: 
1.  Set the “one-touch lock” option to 

On

2.  Press and hold the X button to lock the door. 

Reboot Smart Lock

Press the Reboot button on the bottom to restart the smart lock. The system will 
reboot.

SPECIFICATIONS 

Chipset: Realtek lower-power SOC BLE; BT 5.0;
Maximum access code: 100

Maximum fingerprint inputs: 50 

Hardware encryption: ECC asymmetric encryption chip 
Software encryption: AES 128 
Waterproof: IP65 (Exterior Assembly)
Numeric keypad: touchscreen keypad 
Lock material: zinc alloy 
Battery: 4 

×

 AA batteries 

Battery life: 365 days (if open and close the door for 10 times per day)
Times to unlock and lock: 250,000 times

TROUBLESHOOTING  

1.  How can I unlock the door if the smart lock doesn’t work? 

  Reset the smart lock. 

  Use the provided key to unlock.

2.  How can I unlock the door if the smart lock battery runs low? 

  Insert a micro USB cable into the micro USB port and use a battery to charge the 

smart lock. 

Summary of Contents for eufy Security T8510















Reviews: