Anjon AFF3100 Owner'S Manual Download Page 4

1.  36" Float 
2.  Nozzle Quick-Release 
3.  Fountain Nozzles
4.  Monsoon Hub Adapter
5.  2 Pieces Float Flange 
6.  Fountain Nozzle Hub
7.  25' Mooring Rope x2
8.  Debris Net and Zip Ties
9.  Operation Manual
10.  Monsoon PUMP
11.  4 Pieces M8 1" Machine Screws
12.  1 Plastic Locking Screw
13.  2" x 2" Female Adapter 
14.  1.5" x 1.5" Female Adapter 
15.  1.5" Fitting
16.  1.5" x 2" Male Adapter x2 

6. Fountain Nozzle Hub

7. Mooring Rope x2

5. Float Flange x2

2. Nozzle Quick Release

1. 3

6" Float

4. Monsoon Hub Adapter

3. Fountain Nozzles

10. Monsoon Pump

1. 

Slide the 2 Flange halves around the hub

2. 

Lift Float and attach it to the hub using the 
4 M8 1" Screws provided

MONSOON 3000:

 Attach 1.5" x 1.5" 

female adapter, and 1.5" fitting to pump

MONSOON 6100:

 Attach 2" x 2" male 

adapter, 2" x 2" female adapter, and 2" x 2" 
male adapter to pump

MONSOON 5200 & 8000:

 Attach 2" x 2" 

female adapter, and 1.5" fitting 

 

to pump

ATTACH MONSOON ADAPTERS TO YOUR MONSOON WATER PUMP

1. 

Center Monsoon Hub Adapter in Fountain Nozzle Hub

2. 

Attach Nozzle Quick-Release over the Monsoon Hub Adapter and twist to lock

3. 

Install the Plastic Locking Screw to the Quick-Release to Float Flange

Attach Nozzle to 

1.5" fitting and 

attach to the top of 

the float assembly

Connect Assembled 
Float to Monsoon 
Pump, turn clock-wise 
until snug (careful not 
to cross thread)

1. 

Remove all components from packaging. 

2. 

Inspect all fountain kit components for damage or missing pieces. Call us at 1-800-553-5605 if anything is missing or damaged.

3. 

Once it is determined that all components are undamaged, you are ready to assemble your Floating Fountain.

12. 

Plastic Locking Screw

9. O

peration Manual

FIG 1

FOUNTAIN ASSEMBLY

FOUNTAIN NOZZLE OPTIONS FOR MODELS: AFF3000, AFF5200, AFF6100, AFF8000

Tip: Adjust the deflector vertically on the nozzle tube to achieve the desired degree of deflection

13. 

2" x 2" Female Adapter

16. 

1.5" x 2" Male Adapter

15. 

1.5" Fitting

14. 

1.5" x 1.5" Female Adapter

8. 

Debris Net and Zip Ties

11. M8 1" Machine Screws x4

Scan QR 

code for 

assembly 

instructions.

Summary of Contents for AFF3100









Reviews: