000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 33 of 47
Commercial In Confidence
Important settings needed for testing:
Table 10 PDN2
–
PDN4 settings
Setting
Description
MS IP Address
IP for mobile, it should be configured in the same subnet as the S-
CORE. For more information, see the
Anite S-CORE Application
Testing: System Configuration Guide
.
AP Name
Please set the Access point name for the PDN requests from the
device.
P-CSCF/DNS tab
Perform the following on the P-CSCF/DNS tab:
1.
Select the number of P-CSCF addresses that the UE requires for the test cases.
