12
N em o
WA LKER
A IR
User
M anu a l
NEMO WALKER AIR SYSTEM OVERVIEW
The testing environment consists of a Nemo Walker Air Master tablet and one to six smartphones,
used as Slave units. There is also an optional backpack for carrying the devices including 3x10,000
mAh Verbatim USB battery pack, one 12/220/110v charging cable for the whole system, and a
backpack for carrying . For connecting the GPS receiver to the system, please refer to the
documentation in the GPS receiver package. The Nemo Walker Air software is preinstalled in the
devices so you can start measurements as soon as you receive the product package.
NEMO WALKER AIR SETUP
INSTALLING NEMO WALKER AIR USING SD CARD
Nemo Walker Air devices are delivered preinstalled but you may need to update Nemo Walker Air
yourself. Please follow these instructions carefully to install Nemo Walker Air.
Installing Nemo Walker Air:
1. Uninstall the old Walker Air version by going to
Apps/Settings/More/Application Manager
and
tapping
Uninstall
.
2. Connect the USB cable to the Nemo Walker Air device and to the computer where you have the
Nemo Walker Air installation files.
3. Select
Disk drive/Media device (MTP)
as the connection type.
4. Copy Nemo Walker Air.apk file onto your device under Nemo folder.
5. Disconnect the data cable from the device.
6. Go to
Apps/My Files/All Files/Nemo
and select Walker Air.apk file from the list.
7. If you already have Nemo Walker Air installed on the device, the installer program will ask to
replace the old version. Select
Install
.
8. Repeat all steps for each device.
9. Installation is started and once it is finished, you can start using Nemo Walker Air.