ANITA ©
Serie GZ-539
15
8.
INSTALLATION AND COMMISSIONING
The machine must only be installed and commissioned by qualified
personnel! All relevant safety regulations must be strictly adhered to! If the
machine is delivered without a table, be sure to use a stand and table top
that can hold the weight of the machine with its motor. It is very important
to ensure that the stand of the machine is firm and stready, also during
. sewing.
8.1.
Installation
The site where the machine is installed must be provided with suitable connections for the
electric current, see Chapter 1 Specifications.
It must also be ensured that the standing surface of the machine site is firm and horizontal,
and that sufficient lighting is provided.
For packing reasons the table top is in the lowered position.
The table height is adjusted as described below.
8.1.1.
Adjusting the table height
Picture 11
•
Lossen screws 1 and 2 and set the table height as required.
•
Firmly tighten screw 1.
•
Set the required pedal positron and tighten screws 2.
Summary of Contents for GZ-539-407
Page 2: ...ANITA Serie GZ 539 2...
Page 39: ...ANITA Serie GZ 539 39...
