Anita GARUDAN GF-1130-4412 MH, User Manual

Page: 19 / 71

© ANITA
MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH 19
3. To adjust the
distance between the hook tip ③ and the
needle ②, loosen the hook block screws ⑥ and the gear
screws ⑤. Adjust the distance to 0.05-0.1 mm. Then tighten
all screws.
4. Adjust the guard plate of the hook by bending it so
that the
distance between the plate ⑧ and the needle
⑦ is 0.1 -0.2 mm.
The guard plate is intended to prevent contact of the
needle with the hook tip, if the needle bends.
Adjust the distance when changing the needle size.
www.garudan.cz