Anita Garudan GC-3317 Series, User'S Manual And Spare Parts Book

Page: 20 / 61

ANITA ©
GC-3317-443 MH
20
26. ADJUSTING THE THREAD TRIMMING CAM
Turning the handwheel, aligh black marker dot (1) in the machine arm with white marker dot
(2) in the handwheel.
Turn the thread trimming cam until first screw (3) in the thread trimming cam aligns with
cam roller shaft (4) in the cam roller arm, and tighten screw at the aligned position.
(fig.21)
27. HOW TO REPLACE THE KNIVES
Remove the throat plate and the feed dog. Rotary knife (1) can be removed by removing
connecting screw (3) in driving plate (2), and fixed knife (4) can be done by removing
setscrew (5) of the fixed knife. After replacement adjust the knife pressure.
(fig.22)
www.garudan.cz