Anita Garudan GC-3317 Series, User'S Manual And Spare Parts Book

Page: 12 / 61

ANITA ©
GC-3317-443 MH
12
13. ADJUSTING THE STITCH LENGTH
To adjusting the stitch length push lock plate (1). Align the stitch lenght dial (2) indicator to
the line of the lock plate turning stitch length dial counterclockwise or clockwise.
Reverse stitching
Push the feed lever (3) down. The machine performs reverse feed stitching as long as the
lever is held depressed. The moment you release the lever, the machine resumes the normal
stitching mode.
(fig.8)
14. THREAD TAKE-UP SPRING
Adjusting the thread take-up spring stroke
Loosen setscrew (2), and trurn the adjusting plate (1). Turn the adjusting plate (1) to the
right (counterclockwise), increase its noviny range. Turn the adjusting plate (1) to the left,
decrease its moving range.
Adjusting the thread take-up spring tension
Turn the tension stud (3) over toward left to increase tension. Turn it to the right, decrease
tension. (fig.9)
(fig.9)
www.garudan.cz