Animo OptiFresh NG 2.0 2016 Service Book Download Page 49

Page: 49 / 108

2016/01 Rev. 0.0

OptiFresh (Bean) NG 2.0

Example:
Three switching times set

Machine automatically switches from Stand-by to ON at 9 am. At 11am back to Stand-by, etc., etc.

During stand-by the key panel is switched off and the boiler temperature drops to the set stand-by temperature

(menu 2.4 Settings / Stand-by temp / off - 60-80°C (by default the stand-by temp is set to ‘off’)

9.00 - 11.00

12.00 - 13.00

14.00 - 15.00

Three switching times set & Energy save mode activated.

When the machine is ON and it is not in use, it switches to power save after 30 min.

The boiler temperature decreases by 5°C every 30 minutes. If a product is chosen after 2 hours, the machine

springs back into life. In this way, less energy is used if the machine is switched on but is used little or if

someone forgot to switch it off.

Energy save mode activated (no switching times set)

If there is no dispensing, the machine switches to power save after 30 min. The boiler temperature decreases

by 5°C every 30 minutes. If a product is chosen after 2 hours, the machine springs back into life. In this way,

less energy is used if the machine is switched on but is used little or if someone forgot to switch it off.

Example:
Three set prices for beverages Mon-Fri.

Service menu / 2.2 Button settings / Button 1- - - - 10 Price / Price high 1,00 + Price low 0,50
Service menu / 2.4 Settings / Payment system / G13

Operator menu / 1.0 Free vend / No

1.2 Switching times / mo-fri / mo-fri

9.00 till 11.00 free

Pricing time / on time 9.00 & off time 11.00

Price choice / free

If no time is set from 11:00 to 18:00 the machine is automatically switched from free to price high rate.

1.2 Switching times / mo-fri / mo-fri

18.00 till 22.00 price low (0,50)

Pricing time / on time 18.00 & off time 22.00

Price choice / price low 0,50

After 22:00 the machine will automatically switch over from low price to high price. When Saturday and Sunday

have not been set the machine stays these days on price high rate.

9.00

18.00

Price choice

Free

Price choice

Price low: € 0,50

Price choice

Price high: € 1,00

Price choice

Price high: € 1,00

11.00

22.00

Summary of Contents for OptiFresh NG 2.0 2016













































































































Search results

Summary of Contents for OptiFresh NG 2.0 2016

Reviews:

Related manuals for OptiFresh NG 2.0 2016

Brands by name

Popular brands

Animo OptiFresh NG 2.0 2016, Service Book

Search results

Summary of Contents for OptiFresh NG 2.0 2016

Reviews:

Related manuals for OptiFresh NG 2.0 2016

Brands by name

Popular brands