2017/04 V.1
60
EN
Container (CNe/CNi)
4
Operation
4.1
Prepare for use
4.1.1
Preparation
1
Make sure that the machine is properly installed. Refer to 3.2
2
Make sure the machine and the accessories are in good condition. If the machine or accessories
are in poor condition, contact a service engineer.
3
Make sure that the inner pot of the container is clean. Refer to 5.2.4
4.1.2
Prepare CNe electrical container for use
1
Put the cable with inlet plug into the back of the container and insert the plug into the socket.
2
Pre-heat the container by filling it with approximatly 2 liters of hot water for at least 10 minutes
before the brew starts.
4.1.3
Prepare CNi insulaterd container for use
1
Pre heat the container by filling it with approximatly 2 litres of hot water for at least 5 minutes.
4.2
Prepare a container for coffee
1
Put the coffee blender (C) into the container (B).
2
Put the basket filter (D) into the container.
3
Put the filter paper (E) into the basket filter.
4
Put a coffee label into the label holder (A) on the tap of the
container. Snap the holder open with your fingernail.
4.3
Prepare a container for tea
1
Put the tea filter (B) into the container.
2
Put the filling pipe (C) onto the tea filter.
3
Put a tea label into the label holder (A) on the tap of the
container. Snap the holder open with your fingernail.
E
B
A
A
C
D
C
B
A
A
