Animo
5
09/99
A 200-3
7. MAINTENANCE
•
The machine can be cleaned with a clean,
damp cloth.
•
The jug and basket filter can be cleaned in the
same way.
Attention!
The basket filter should
not be placed in a dishwasher.
•
Coffee stains in the jugs can be removed
using Animo coffee stain remover.
•
The machine can leave lime deposits
during use. The machine should be
descaled regularly in order to ensure that it
functions efficiently. Animo scale remover
is recommended.
Animo supplies both products in the
following quantities:
-
Coffee detanning agent
100 sachets for 10 grams art.no. 49009
-
Descaling agent
48
sachets for 50 grams art.no. 49007
7.1Descaling
1.
Switch off the machine (fig. 2B).
2.
Slide the basket filter into the machine
3.
Place an empty jug on the lower hot plate.
4.
Dissolve 1 sachet of 50 grams of Animo
descaling agent remover in 1 litre of
lukewarm 60 -70˚C water (see instructions
for use on the labelling).
5.
Remove the plug of the third hot plate
at the back of the machine.
6.
Unscrew the third hot plate at the front
(See arrow fig. 2).
7.
Remove the third hot plate and the
st.st. safety-lid
8.
Pour 1 litre of Animo descaling agent
remover into the reservoir (fig. 1E) and
switch on the machine (fig. 2B).
9.
Turn the selection switch (fig. 2C) to the
half position and press the start button
(fig. 2D). The solution will now begin to
flow through the system.
*
Attention! If the machine begins to
steam heavily, switch it off immediately
(fig. 2B).
Wait for 1 minute. The solution
will flow through automatically. Switch the
machine back on. Press the start button
(fig. 2D) as well.
10. When half of the solution has run through
the machine, switch it off for about 2
minutes (fig. 2B). The solution will now
undergo a reaction with the lime scale.
11. After the pause, switch the machine back
on and allow the rest of the solution to
flow through the machine. Press the start
button again (fig. 2D).
*
Attention! Keep an eye on the reservoir
while the solution is running through
the machine
. Turn the machine off as
soon as the reservoir is empty. Then rinse
clean the metal contacts in the cold water
reservoir with water or a wet cloth.
12. Replace the parts, mentioned in point 7.
13. After descaling the machine, rinse
thoroughly by carrying out the normal
coffee preparation process 3 times
(without paper filters and coffee).
14. Clean the basket filter and jug thoroughly.
15. The machine is now ready to be used
again.
