![Animated Lighting Haunted House in a Box Assembly And Operating Instructions Manual Download Page 11](http://html1.mh-extra.com/html/animated-lighting/haunted-house-in-a-box/haunted-house-in-a-box_assembly-and-operating-instructions-manual_2943848011.webp)
A Haunted House in a Box light controller is rated for loads between 15 and 60 Amperes maximum. Most
household wall outlets are rated for loads of 15 Amperes maximum. Therefore, unless you have specifically
installed an outlet that can handle 30 Amperes, you should locate two over-under outlets on separate circuits to
power the light controller. (One power cord per two-hole, over-under outlet.)
ALWAYS REMOVE POWER FROM CONTROLLERS BEFORE OPENING THE LID COVER TO
THE CONTROLLER. DO NOT ATTEMPT TO PLUG IN OR REMOVE CORDS FROM CHANNEL
OUTLETS UNTIL POWER TO THE CONTROLLER HAS BEEN REMOVED.
Plugging the Haunted House in a Box
Light Controllers into Power
Animated Lighting, Inc PAGE 10