There are two Christmas In a Box (CIAB) Show Cards: Classic Christmas
Show and “Techno” Christmas Show. This allows you to plug in either “show”
depending on your tastes in holiday music. The instructions to change the Light
Show are right below the Monster Brain (find the blue arrow). If you follow
these instructions (REMEMBER: Remove Power First before you start pulling
anything out) you will be able to change the show with no problem!!
Christmas in a Box Show Cards
Christmas
I N A B O X
Later in this manual you will see different examples of how people lay out
their “lighting channels” for their display. We have listed one really simple way
to lay out lighting channels on a typical residential display. Please note the
colors and the numbers on the diagram correspond to the various plugs on the
Light Controller. Plugging in your light strings to the light controller should be a
breeze!
To change the light show:
1. Unplug power to entire system
2. Gently push in card where arrow is pointing and release
3. Remove existing show card and put in safe place
4. Insert new show card, label facing up
5. Push in show card until it clicks
6. Plug in power and wait 30 seconds
To change the light show:
1. Unplug power to entire system
2. Gently push in card where arrow is pointing and release
3. Remove existing show card and put in safe place
4. Insert new show card, label facing up
5. Push in show card until it clicks
6. Plug in power and wait 30 seconds
Typical Simple Installation
Typical Simple Installation
9
9
16
16
12
12
11
11
10
10
1 2 3 4
1 2 3 4
5 6 7 8
5 6 7 8
13
13
14
14
15
15
Typical Simple Installation Diagram
Christmas
I N A B O X
Christmas Kit
v1.0 1-21-2008
Monster Brain
©2008 Animated Lighting
Animated Lighting, Inc PAGE 3
