RBS-T Linear Encoder Installation Manual and Owner’s Guide
P/N 70000426
All rights reserved. Subject to change without notice.
Page 9 of 43
03-Nov-98
#8-32 Reader Head Mounting Screws
#6-32 Jack Screws
#8-32 Nylon Self Locking Nuts
BPALGN
S/N 010 -0034567
F 02
5V
RBS-5
Figure 5, Reader Head Mounting Hardware
CAUTION:
Do not use the reader head mounting screws to pull the reader head
flush against the reader head mounting bracket. The reader head must stay
aligned with the encoder body. The jack screws hold the reader head away from
the reader head mounting bracket when the mounting screws are tightened.
3. Refer to
Figure 5
. Place the two nylon self-locking nuts in the cavities on the back
side of the reader head. Start the two #8-32 cap screws into the nuts, but do not
tighten. Start the four jack screws into the reader head mounting bracket.
RBS-5
S/N 010
P/N
M.Length
-0034567
20501048
1200 mm
F05
Reader Head
Indicator
Jack Screws (4)
Backer Bar
& Encoder
INDY
Figure 6, Indicator Positioning For Reader Head Alignment
Summary of Contents for RBS-T
Page 1: ...www anilam com...
