Anglerfish Creative Lighting TRIGGER V1.0, User Manual

Page: 14 / 19

p.10 Anglerfish Crea�ve Ligh�ng | Anglerfish Trigger V1.0
the camera strobe serval �mes and see if the LED blinks
while the camera strobe fires.
If the LED does not flash bright white make sure the trigger is
in the blue mode. The red mode disable s the white LED to
conserve power.
If the LED does flash bright, the fault could be in the op�cal
cable or the strobe se�ngs. Make sure you f ollow the strobe
manufacture ’ s se�ngs for opera�ng the remote strobe via
op�cal cable.
Inspect the op�c cable for bends or damage. We recommend
using only high quality mul�
- strand op�cal sync cables.
Single core cable s are prone to failure and will not func�on
properly with the Anglerfi sh Trigger.
In some situa�ons, salt and dart accumulates on the surface
of the remote strobe ’s op�cal bulkhead. Inspect the
bulkhead for debris, salt or fouling. Cleaning the inside of
both the remote strobe and the trigger op�cal bulkhead s
with rubbing alcohol and Q -Tips will ensure maximum light